STGD7NB60H-1 n-channel 7a - 600v ipak powermesh ? igbt n high input impedance (voltage driven) n low on-voltage drop (v cesat ) n low gate charge n high current capability n very high frequency operation n off losses include tail current n through-hole ipak (to-251) power package in tube (suffix"-1") description using the latest high voltage technology based on a patented strip layout, stmicroelectronics has designed an advanced family of igbts, the powermesh ? igbts, with outstanding perfomances. the suffix "h" identifies a family optimized to achieve very low switching times for high frequency applications (<120khz). applications n high frequency motor controls n smps and pfc in both hard switch and resonant topologies ? internal schematic diagram absolute maximum ratings symbol parameter value unit v ces collector-emitter voltage (v gs = 0) 600 v v ecr emitter-collector voltage 20 v v ge gate-emitter voltage 20 v i c collector current (continuous) at t c = 25 o c14a i c collector current (continuous) at t c = 100 o c7a i cm ( ) collector current (pulsed) 56 a p tot total dissipation at t c = 25 o c55w derating factor 0.44 w/ o c t stg storage temperature -65 to 150 o c t j max. operating junction temperature 150 o c ( ) pulse width limited by safe operating area type v ces v ce(sat) i c STGD7NB60H-1 600 v < 2.8 v 7 a june 1999 3 2 1 ipak to-251 (suffix "-1") 1/8
thermal data r thj-case r thj-amb r thc-sink thermal resistance junction-case max thermal resistance junction-ambient max thermal resistance case-sink typ 2.27 100 1.5 o c/w o c/w o c/w electrical characteristics (t j = 25 o c unless otherwise specified) off symbol parameter test conditions min. typ. max. unit v br(ces) collector-emitter breakdown voltage i c = 250 m a v ge = 0 600 v i ces collector cut-off (v ge = 0) v ce = max rating t j = 25 o c v ce = max rating t j = 125 o c 10 100 m a m a i ges gate-emitter leakage current (v ce = 0) v ge = 20 v v ce = 0 100 na on ( * ) symbol parameter test conditions min. typ. max. unit v ge(th) gate threshold voltage v ce = v ge i c = 250 m a35v v ce(sat) collector-emitter saturation voltage v ge = 15 v i c = 7 a v ge = 15 v i c = 7 a t j = 125 o c 2.3 1.9 2.8 v v dynamic symbol parameter test conditions min. typ. max. unit g fs forward transconductance v ce =25 v i c = 7 a 3.5 5 s c ies c oes c res input capacitance output capacitance reverse transfer capacitance v ce = 25 v f = 1 mhz v ge = 0 390 45 10 560 68 15 730 90 20 pf pf pf q g q ge q gc total gate charge gate-emitter charge gate-collector charge v ce = 480 v i c = 7 a v ge = 15 v 42 7.9 17.6 55 nc nc nc i cl latching current v clamp = 480 v r g =10 w t j = 150 o c 28 a switching on symbol parameter test conditions min. typ. max. unit t d(on) t r delay time rise time v cc = 480 v i c = 7 a v ge = 15 v r g = 10 w 15 48 ns ns (di/dt) on e on turn-on current slope turn-on switching losses v cc = 480 v i c = 7 a r g = 10 w v ge = 15 v t j = 125 o c 160 70 a/ m s m j STGD7NB60H-1 2/8
electrical characteristics (continued) switching off symbol parameter test conditions min. typ. max. unit t c t r (v off ) t d (off) t f e off (**) e ts cross-over time off voltage rise time delay time fall time turn-off switching loss total switching loss vcc = 480 v i c = 7 a r ge = 10 w v ge = 15 v 85 20 75 70 85 130 ns ns ns ns m j m j t c t r (v off ) t d (off) t f e off (**) e ts cross-over time off voltage rise time delay time fall time turn-off switching loss total switching loss vcc = 480 v i c = 7 a r ge = 10 w v ge = 15 v t j = 125 o c 150 50 110 110 220 290 ns ns ns ns m j m j ( ) pulse width limited by max. junction temperature ( * ) pulsed: pulse duration = 300 m s, duty cycle 1.5 % (**)losses include also the tail (jedec standardization) thermal impedance STGD7NB60H-1 3/8
output characteristics transconductance collector-emitter on voltage vs collector current transfer characteristics collector-emitter on voltage vs temperature gate threshold vs temperature STGD7NB60H-1 4/8
normalized breakdown voltage vs temperature gate charge vs gate-emitter voltage total switching losses vs temperature capacitance variations total switching losses vs gate resistance total switching losses vs collector current STGD7NB60H-1 5/8
switching off safe operating area fig. 1: gate charge test circuit fig. 3: switching waveforms fig. 2: test circuit for inductive load switching STGD7NB60H-1 6/8
dim. mm inch min. typ. max. min. typ. max. a 2.2 2.4 0.086 0.094 a1 0.9 1.1 0.035 0.043 a3 0.7 1.3 0.027 0.051 b 0.64 0.9 0.025 0.031 b2 5.2 5.4 0.204 0.212 b3 0.85 0.033 b5 0.3 0.012 b6 0.95 0.037 c 0.45 0.6 0.017 0.023 c2 0.48 0.6 0.019 0.023 d 6 6.2 0.236 0.244 e 6.4 6.6 0.252 0.260 g 4.4 4.6 0.173 0.181 h 15.9 16.3 0.626 0.641 l 9 9.4 0.354 0.370 l1 0.8 1.2 0.031 0.047 l2 0.8 1 0.031 0.039 a c2 c a3 h a1 d l l2 l1 1 3 = = b3 b b6 b2 e g = = = = b5 2 to-251 (ipak) mechanical data 0068771-e STGD7NB60H-1 7/8
information furnished is believed to be accurate and reliable. however, stmicroelectronics assumes no responsibility for the co nsequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. no license is granted by implication or otherwise under any patent or patent rights of stmicroelectronics. specification mentioned in this pu blication are subject to change without notice. this publication supersedes and replaces all information previously supplied. stmicroelectron ics products are not authorized for use as critical components in life support devices or systems without express written approval of stmicr oelectronics. the st logo is a trademark of stmicroelectronics ? 1999 stmicroelectronics C printed in italy C all rights reserved stmicroelectronics group of companies australia - brazil - china - finland - france - germany - hong kong - india - italy - japan - malaysia - malta - morocco - singapore - spain - sweden - switzerland - united kingdom - u.s.a. http://www.st.com . STGD7NB60H-1 8/8
|
